RAMCLEAN® products usually have a low flow rate and high complexity levels (containing fillers) which make it difficult to remove them from the machine using the following resin.
- Passage washing: Make half a dose of cleaning material (half the volume of the extruder) made up from 50% suitable RAMCLEAN® and 50% of the following resin, and using this mixture to wash out the RAMCLEAN® cleaning solution stuck in the machine.
- RAMCLEAN® materials are designed to exit the machine easily. If they become difficult to remove, consider using a different RAMCLEAN® product and/or using a different procedure. Please consult with one of our experts.